Fujitsu M10 Product Notes

Chapter titles in this document SPARC M10-1 SPARC M10-4 SPARC M10-4S
Chapter 1 Software Requirements xxx
Chapter 2 XCP 2240-Related Information xxx
Chapter 3 Information on Software xxx
Chapter 4 Information on SPARC M10-1 Hardware x
Chapter 5 Information on SPARC M10-4 Hardware x
Chapter 6 Information on SPARC M10-4S Hardware x
Chapter 7 Information on PCI Expansion Unit Hardware x (when
introduced)
x (when
introduced)
x (when
introduced)
Chapter
8 Contents of Revision of Documentation xxx
How to Use This Document
This document supports all models of SPARC M10 Systems. Depending on the server
you use, read the related items listed in the following table.
The information about firmware and software, which are described in Chapter 1,
Chapter 2, and Chapter 3, is common to all models. Some of the information
are only
related to a specific model. In such case, the applicable model name is indicated.
The information about hardware devices is provided in Chapter 4, Chapter 5, and
Chapter 6 separately for each model. The contents common to all models are
described in all chapters describing hardware. Therefore,
when you check the
hardware information about multiple models, you will find that some contents are
duplicated in some chapters.
Check the information on the PCI expansion unit (Chapter 7) when the PCI
expansion unit is introduced.
Contents of revision of documents (Chapter 8) are provided in each document. Check
whether the contents of your document have been revised.
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2240
･
March 2015x

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English