Fujitsu M10 Product Notes

Table 3-21
Problems resolved in versions prior to XCP 2050
SPARC M10-
RTI No. 1 4 4S Description Workaround
RTIF2-
121113-001
xx x After setting an invalid value for the user
name with the setsmtp(8) command, you
execute the setemailreport(8) command
to send a test mail. Then the reply
address shows that the mail has been
successfully sent.
There is no effective workaround.
Even if it is displayed that the test mail
has been successfully sent, it is not sent.
RTIF2-
121113-002
xx xIf you execute the setaudit delete
command and use the viewaudit(8) to
display the audit log, some audit logs
may not be deleted.
There is no effective workaround.
RTIF2-
121113-006
xx xIf you display the XSCF Web screen in
another window or in another tab
without using the XSCF Web menu,
contents may not be normally displayed.
For operation to display the XSCF Web
screen, use the menu tree.
RTIF2-
121113-007
xx xWhile XSCF is starting, process down,
panic or watchdog timeout occurs, which
may cause XSCF to be reset.
Confirm that XSCF is successfully started.
If it is not started, turn off the power of
the physical partition (PPAR), and then
disconnect the input power supply to the
system and back on again (AC OFF/ON).
When recycling the power supply to the
system, wait for 30 seconds or more to
turn on the input power supply
after
disconnecting.
In case XSCF is not started even if
recycling the input power supply to the
system, replace the CPU memory unit
lower (CMUL) or the motherboard unit
(MBU).
the PPARs. Stop all the PPARs, and execute the resetdateoffset -a command to
clear the time difference.
b. If the Oracle Solaris time is other than January 1, 1970, contact a field engineer.
In this case, do not execute the resetdateoffset(8) of setdate(8) command on the
XSCF.
c. If the
PPAR power is off, power on the PPAR. After that, check the Oracle
Solaris time, and perform the above steps a. or b.
■
If phenomenon 3 occurs:
If phenomenon 1 or 2 also occurs, perform its [How to restore] action first.
Set the Oracle Solaris time again.
Problems resolved in versions prior to XCP 2050
The following table lists the problems resolved in versions prior to XCP 2050.
Chapter 3 Information on Software 145

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English