Fujitsu M10 Product Notes

XSCF>

showlogs

error
XSCF>

showstatus
XSCF>

getflashimage

file:///media/usb_msd/ images/XCPxxxx.tar.gz
XSCF>

flashupdate

-c

update

-m

xcp

-s

version
XSCF>

flashupdate

-c

sync
9.
Confirm that there are no faulty components.
Restrictions on adding expansion rack 2
Addition of a crossbar box using the addfru(8) command is not supported at present.
To add a crossbar box, see the "9.4 Installing Expansion Rack 2" in the Fujitsu
M10/SPARC M10 Systems Installation Guide and read Steps 17 and 18 as follows:
17.
Connect all power cords of the cros sbar box and
SPARC M10-4S to the input
power supply.
For details, see "5.2 Connecting Cable to SPARC M10-4/SPARC M10-4S" and "5.4
Connecting Cable to Crossbar Box."
18.
Update the firmware to the same version as the master XSCF.
■
XCP 2040 or earlier
■
XCP 2041 or later
Problems with Hardware and
Workarounds
There is no problem that has been confirmed as of this moment.
Chapter 6 Information on SPARC M10-4S Hardware 185

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English