Fujitsu M10 - Problems Resolved in XCP 2221; Problems Resolved in XCP 2220

Table 3-9
Problems resolved in XCP 2230 (continued)
SPARC M10-
RTINo. 1 4 4S Description Workaro und
RTIF2-
140910-
001
xIf Oracle Solaris 11.2 and later is running
and the system board is deleted by
dynamic reconfiguration of physical
partitions, Hypervisor may abort.
There is no effective workaround.
Table 3-10
Problems resolved in XCP 2221
SPARC M10-
RTI No. 1 4 4S Description Workaround
RTIF2-
140611-001
x x x Security fixes. (CVE-2014-0224)
For details, see see the Oracle website
relating to the following:
Critical Patch Updates
Update the XCP firmware to XCP 2221 or
later.
RTIF2-
140617-002
xxIn SPARC M10-4/M10-4S, power supply
interlocking by RCIL does not work.
Moreover, if the following RCIL-related
commands are executed, the "Controller
response timeout" error message is
output and the command ends
abnormally.
setremotepwrmgmt(8)
showremotepwrmgmt(8)
getremotepwrmgmt(8)
clearremotepwrmgmt(8)
There is no effective workaround.
Operate power supply of the target
SPARC M10 systems and I/O devices
manually.
Problems resolved in XCP 2221
The following table lists the problems resolved in XCP 2221.
Problems resolved in XCP 2220
The following table lists the problems resolved in XCP 2220.
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2240
･
March 201596