Fujitsu M10 Product Notes

Note -
When Oracle Solaris 11.1 is installed in SPARC M10 Systems, the following message
appears at the start of Oracle Solaris.
[Example of message]
WARNING: failed to instantiate provider ldmd for process 753
WARNING: failed to instantiate provider ldmd for process 753
Sep 24 06:15:59 svc.startd[11]: svc:/ldoms/ldmd:default: Method "/opt/SUNWldm/bin/ldmd_
start" failed with
exit status 95.
Sep 24 06:15:59 svc.startd[11]: ldoms/ldmd:default failed fatally: transitioned to maintenance
(see 'svcs -xv' for details)
After Oracle Solaris 11.1 is installed, apply SRU1.4 or later.
Then, the Oracle VM Server for SPARC package is updated to the version supporting SPARC
M10 Systems, and such message will no longer be output.
For other information about Oracle Solaris, see "Problems with Oracle Solaris and
Workarounds."
Notes on using Oracle Solaris 10
■
[SPARC M10-4S]
When the control domain is running on Oracle Solaris 10 with Oracle VM Server
for SPARC version 3.1.0.1 or older, if the physical partition dynamic reconfiguration
(PPAR DR) feature is enabled, the ldoms/ldmd service fails to start and Oracle VM
for SPARC does not work.
The PPAR DR feature is enabled at the time of shipment. Therefore, either disable
the PPAR DR feature before setting up logical domains, or, update Oracle VM
Server for SPARC to
version 3.1.0.1 or later.
Configuration of the PPAR DR feature is performed with the setpparmode(8)
command of XSCF firmware. For details on the setpparmode(8) command, refer to
Fujitsu M10/SPARC M10 Systems XSCF Reference Manual.
To update Oracle VM Server for SPARC version to 3.1.0.1, apply patch no.
150817-01 after installing Oracle
VM Server for SPARC 3.1.
■
[SPARC M10-4S]
When Oracle Solaris 10 is running on the control domain, in order to perform
dynamic reconfiguration of physical partitions (PPAR DR) with the
deleteboard(8), addboard(8) commands, update to Oracle VM Server for SPARC
3.1.1 or newer. When updating to 3.1.1, apply patch 150817-02 after installing
Oracle VM Server for
SPARC 3.1.
Notes when using a version older than Oracle VM
Server for SPARC 3.1.0.1
[SPARC M10-4S]
When the physical partition dynamic reconfiguration (PPAR DR) feature is enabled
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2240
･
March 20154

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English