Fujitsu M10 Product Notes

Table 3-15
Problems resolved in XCP 2090 (continued)
SPARC M10-
RTI No. 1 4 4S Description Workaround
RTIF2-
131129-001
xx xIf there is a mounted memory, the last
eight digits of whose "Code" start with
"00", as displayed by the showhardconf
(8) command in, execution of any of the
following actions may result in incorrect
display, showing a value of 0 for both the
"Code" and the "Size" of that memory,
as
shown.
- Execute the restoredefaults factory
command
- Execute the initbb(8) command
- Change the mounting point of memory
[Example]
XSCF>
showhardconf
:
MEM#10B Status:Normal;
+ Code:ce8001M393B2G70QH0-YK0
0000-00511571;
+ Type:07; Size:16 GB;
XSCF>
showhardconf
:
* MEM#10B Status:Deconfigured;
+ Code:000000 0000-00000000;
+ Type: ; Size:0 GB;
Apply the latest version of the XCP, and
then
execute power off and on.
RTIF2-
131213-006
xx xThe "LDC Protocol info from PPAR
(PPAR ID X : Domain Service Data Send
Failed)" event log is registered on a
running logical domain and shutdown of
that logical domain may not be properly
executed.
There is no effective workaround.
Either reboot the control domain or
execute the "rebootxscf -a" command to
reboot XSCF.
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2240
･
March 2015122

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English