Fujitsu M10 Product Notes

Table 3-22
Problems that might occur in any versions of Oracle Solaris and workarounds (continued)
SPARC M10-
Bug 1 4 4S Description Workaround
-xxxWhen a logical domain with a 10 Gigabit
Ethernet card (SP1X7HF1F) for which the
value of OpenBoot PROM environment
variable diag-switch? is set to true, the
console displays the following warning
message and the error log records "Msg:
Device error (FCode informed error)".
WARNING: /pci@X,XXXXXX: FCODE
mapin doesn't match decoded register
type;
Also, executing the showstatus(8)
command may show "Degraded" for the
FRU on which the relevant PCI card is
mounted.
Ignore all these outputs.
To prevent these outputs, execute the
following command on the ok prompt to
change the value of OpenBoot PROM
environment variable diag-switch? to
false.
setenv diag-switch? false
-xIf dynamic
reconfiguration is performed
on a physical partition which has a dual
channel 10G FCoE card (SP1X7FBR2F/
SP1X7FBS2F/7101683 (7101684)+7101687
(7101688)) mounted on it, system panic
may occur due to the processing of the
emlxs driver.
There is no effective workaround.
If this specific card is mounted on a
system, conduct any reconfiguration in
deactivated state instead of dynamic
reconfiguration.
-xIf dynamic reconfiguration is performed
on a physical partition which has a Dual
10Gbps FCoE card (SE0X7EC12F/
SE0X7EF12F/SG-PCIEFCOE2-Q-TA
(SG-XPCIEFCOE2-Q-TA, 7105382)/SG-
PCIEFCOE2-Q-SR (SG-XPCIEFCOE2-Q-
SR,7105381)) mounted on it, system panic
may occur due to the processing of the
qlge driver.
This has been modified with SRU11.1.8.4.
0, and the patch
145648-04 for Oracle
Solaris 10.
There is no workaround other than
applying the modification.
If this specific card is mounted on a
system, conduct any reconfiguration in
deactivated state instead of dynamic
reconfiguration.
-xIf dynamic reconfiguration is performed
on a physical partition which has a dual
channel 10Gbps FCoE card
(SP1X7FAR2F/SP1X7FAS2F/7101673
(7101674)+7101677
(7101678)) mounted
on it, system panic may occur due to the
suspend processing of the inactivated
qlcnic driver.
This has been modified with SRU11.1.19.
6.0, and the patch 149167-03 for Oracle
Solaris 10.
Before dynamically reconfiguring a
physical partition on which this specific
card is mounted, activate any unplumbed
qlcnic interface with the "ifconfig
interface_name plumb" command.
-xIf dynamic reconfiguration is performed
on a physical partition which has a Dual
Port Gigabit Ethernet card (MMF)
(SP1X7GD1F/7100482 (7100481)),
connection is terminated.
There is no effective workaround.
If this specific card is mounted on a
system, conduct any reconfiguration in
deactivated state instead
of dynamic
reconfiguration.
-xxxWhen using XCP 2210, the Dynamic
Resource Management (DRM) feature of
Oracle VM Server for SPARC does not
work.
Update the XCP firmware to XCP 2220 or
newer.
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2240
･
March 2015164

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English