Fujitsu M10 Product Notes

Table 7-1
Problems and their workarounds for all versions of the PCI expansion unit firmware (continued)
SPARC M10-
RTI No. 1 4 4S Description Workaround
RTIF2-
130724-002
xx x If you install a 6Gbps SAS card in the PCI
expansion unit with the PCI hot plug
(PHP), linkup with PCI Express 8lane
may not be successful and Speed may be
displayed as "5.0GTx4" or "5.0GTx2" in
response to executing the prtdiag(1M)
command.
[prtdiag output example]
/SYS/PCI0 PCIE LSI,sas-pciex1000,72
LSI,2008 5.0GTx2
/pci@8000/pci@4/pci@0/pci@8/
pci@0/pci@0/pci@0/pci@1/pci@0/pci@8/
LSI,sas@0
Restart the physical partitions (PPARs) or
I/O domain, or
reinstall the 6Gbps SAS
card by PHP.
RTIF2-
130724-003
xx x The following error may be registered for
the PCI cards mounted in slots 6, 7, 10,
and 11 of the PCI expansion unit when
the physical partitions (PPARs) are
started.
[Error message example]
FRU: /MBU/PCI#0/PCIBOX#0000/PCI#7
Msg: PCICARD failed
When the device can be recognized from
Oracle Solaris, ignore this error message.
Problems resolved in version 1180 of the PCI
expansion unit firmware
The following table lists the problems resolved in version 1180 of the PCI expansion
unit firmware.
Chapter 7 Information on PCI Expansion Unit Hardware 189

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English