Fujitsu M10 Product Notes

Table 7-4
Problems resolved in version 1150 of the PCI expansion unit firmware (continued)
SPARC M10-
RTI No. 1 4 4S Description Workaround
RTIF2-
131224-002
x x x When the PCI Expansion Unit and
the chassis of SPARC M10 system
are connected by optical cables in a
low-temperature environment,
optical cable error logs may be
registered.
This symptom can be confirmed by
the "showlogs error -v" command.
If the result of the "showlogs error
-v" command is "Msg: LINKCBL
failed", and the 3rd byte of the 4th
line of the "Diagnostic Code" is
either "10", "50" or "60", it
corresponds to this symptom.
[Example of the error message]
In case the 3rd byte of the 4th line
of the "Diagnostic Code" is "10":
XSCF>
show logs error -v
Date: Dec 17 15:50:11
JST 2013
Code: 10000400-
009eff0000ff0000ff-
110000440000000000000000
Status: Information Occurred: Dec
17 15:50:06.930 JST 2013
FRU: /BB#0/PCI#3/LINK/
LINKCBL#1
Msg: LINKCBL failed
Diagnostic Code:
00030001 00000000 0000
00030000 00000000 0000
00030000 00000000 0000
00001000 00000000 00000000
00000000
00000000 00000000 0000
Ignore this error message as it has no effect on
the system.
Problems resolved in version 1130 of the PCI
expansion unit firmware
The following table lists the problems resolved in version 1130 of the PCI expansion
unit firmware.
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2240
･
March 2015196

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English