Fujitsu M10 Product Notes

Table 3-5
Problems that might occur with XCP 2240 and workarounds (continued)
SPARC M10-
RTI No. 1 4 4S Description Workaround
Note t
h
at t
h
is problem occurs eve
n
if t
h
e
microSD card is replaced first.
i
n
formatio
n
.
- If the XSCF setting information is not
saved, execute the setpowerschedule(8)
command and reset the scheduled
operation.
RTIF2-
141111-002
xx xIf any of the following events occur and
the XSCF is reset, an incorrect error log
may be registered. In addition, the XSCF
time after the error occurrence time may
be initialized to January 1, 1970.
- XSCF panic
- watchdog timeout
- The RESET switch on the rear panel
pressed
The following
two examples show the
cases when incorrect error logs are
registered and the error occurrence times
are also initialized.
[Example 1]
Date: Jan 01 09:05:40 JST 1970
Code: 80002008-000e010000ff0000ff-
018b00010000000000000000
Status: Alarm Occurred: Jan 01
09:04:56.276 JST 1970
FRU: /MBU
Msg: Hardware access error.
Diagnostic Code:
00000000 00000000 0000
00000000 00000000 0000
00000000 00000000 0000
00000000
00000000 00000000 00000000
00000000 00000000 0000
[Example 2]
Date: Jan 01 09:05:51 JST 1970
Code: 10000000-000e010000ff0000ff-
010240020000000000000000
Status: Information Occurred: Jan 01
09:05:35.008 JST 1970
FRU: /MBU
Msg: TWI access error
Diagnostic Code:
00000000 00000000 0000
00000000 00000000 0000
00000000 00000000 0000
00000000 00000000 00000000 00000000
00000000 00000000 0000
There is no effective workaround.
Do not press the RESET
switch unless it
is urgent and required.
[How to restore]
After turning off the power of the
physical partition (PPAR), turn off and
then turn on (AC OFF/ON) the input
power of the system. By turning on the
power again, the XSCF time is restored
automatically.
RTIF2-
141204-001
xx xIf the guest domain has been kept active
for a long time, powering off and then
powering on a physical partition (PPAR)
ma
y
cause the
g
uest domain time to
Immediately before powering off a
physical partition or resetting it, execute
the ldm add-spconfig from Oracle VM
Server for SPARC, a
n
d store the latest
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2240
･
March 201578

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English