Fujitsu PA03360-B525 - Page 242

224
The ScanSnap Quick
Menu is hidden.
Is the ScanSnap in Left-
Click Menu Mode?
Mark [Use Quick Menu] on the
Right-Click Menu.
Is ScanSnap Organizer or
CardMinder running?
If these applications are running and
one of them is active, the ScanSnap
interacts with the active application
and scanned images are opened
with it. Therefore, the ScanSnap
Quick Menu is not displayed.
To display the ScanSnap Quick
Menu, exit these applications or
deselect them.
See section "4.6 About Automatic
Interaction with Applications" (page
110).
The Left-Click Menu is
hidden.
Is the ScanSnap in Quick
Menu Mode? (Is the
ScanSnap Quick Menu
displayed after scanning?)
On the Right-Click Menu, uncheck
[Use Quick Menu].
Is the "ScanSnap
Manager
 Scan and
Save Settings" dialog box
open?
Close the "ScanSnap Manager

Scan and Save Settings" dialog box.
Applications cannot be
selected in the
"ScanSnap Manager -
Scan and Save
Settings" dialog box.
Is the ScanSnap in Quick
Menu Mode?
In Quick Menu Mode, you
do not have to select an
application beforehand.
You can select an
application in the
ScanSnap Quick Menu
after scanning.
If you want to select an application in
advance, use Left-Click Menu Mode.
To use Left-Click Menu Mode,
uncheck [Use Quick Menu] on the
Right-Click Menu.
Business cards cannot
be scanned when the
ScanSnap Quick Menu
is used.
In Quick Menu Mode,
business cards cannot be
scanned.
Start CardMinder, and then press
the [SCAN] button with CardMinder
being active. Scanned business card
images are displayed in CardMinder.
Symptom Check This Item Resolution