100 Operating Manual BX900S2
Starting up and operation
© cognitas. Gesellschft für Technik-Dokumentation mbH 2012 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-13570-001.fm
Power Power Settings
Assign the Power Supply Redundancy Mode and the Dynamic
Mode.
– PSU Redundancy (No Redundancy)
– PSU Dynamic Mode (ON)
Power Settings (2)
If required specify the Power Consumption Budget.
– PSU Consumption Budget enable
– Current Consumption Budget
– Power [W]
– Ratio [%]
PIN PIN Setting
If required define a PIN number to protect the LC Display against
unauthorized access.
– PIN enable (OFF)
– PIN (0000)
Check Ekeying Check: This is a function which allows you to query the
compatibility of the modules before startup, and then activate,
partially activate or deactivate the module depending on the
result. For example, you would not activate modules whose
operating voltages or power consumption are not compatible with
the system.
This test begins automatically after switch-on or after a hardware
replacement. If errors are found, you can find out more about
them via the Details button. Replace the defective hardware
component and repeat the test.
Ekeying Check
The Ekeying Check will check the System Unit for mismatching
hardware components.
Ekeying Errors:
– n/m*
– Details
* n = number of mismatches, m = number of missings
To Next Page
Loading...
