BX900S2 Operating Manual 99
Starting up and operation
Network If DHCP is activated (default), the obtained network data is
displayed. Otherwise you can specify the network data manually:
Management LAN Settings (1)
IPv4 settings
– IP Address is assigned by DHCP
– Assign IP Address manually:
– IP Address
– Subnet Mask
– Gateway
Management LAN Settings (2)
IPv4 settings
– Obtain DNS Config. from DHCP
– Assign primary and secondary Domain Servers
– DNS Server 1
– DNS Server 2
Management LAN Settings (3)
IPv6 settings
– IPv6 is enabled
– Obtain IP Address from DHCP
– IP Address
Management LAN Settings (4)
IPv6 settings
– Obtain DNS Config.. from DHCP
– Assign DNS Server manually:
– 1:
– 2:
To Next Page
Loading...
