56 Operating Manual BX900S2
Hardware installation
© cognitas. Gesellschft für Technik-Dokumentation mbH 2012 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-13569-001.fm
Ê Fasten the carrier rail at the lower end of the support bracket using three
centering screws (2).
Ê Position the carrier rail in the front left support upright.
Ê Fasten the carrier rail to the front support upright (3) using three M5 screws
including plugwashers.
Ê Repeat the operation for the right carrier rail. This rail does not require a
support bracket.
Figure 8: Position of the cage nuts
Ê Fit the cage nuts for securing the system unit in the corresponding catches
on the right and left support uprights.
1
5
10
15
20
25
13 13
27 27
To Next Page
Loading...
