58 Operating Manual BX900S2
Hardware installation
© cognitas. Gesellschft für Technik-Dokumentation mbH 2012 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-13569-001.fm
Figure 9: Placing the system unit on the rack rails
I Before inserting the system unit in the rack ensure the stability of the
rack.
Ê Lift the back end of the system unit onto the carrier rails in the rack.
Ê Remove the back handles (both sides) on the side of the system (1).
Ê Push the system unit into the rack until just before the front pair of side
handles (2).
/
2
To Next Page
Loading...
