Fujitsu PRIMERGY RX200 S3 Options Guide

6 Options Guide RX200 S3
Overview of the documentation Preface
– The Operating Manual for PRIMERGY RX200 S3 (PDF available on the
ServerBooks CD supplied)
– The Technical Manual for the system board D2300 (PDF available on the
ServerBooks CD supplied)
– The “BIOS Setup” manual (PDF available on the ServerBooks CD supplied)
– The “Ergonomics” manual (PDF available on the ServerBooks CD supplied).
– The “ServerView Suite” manual (printed copy always supplied with the
server, and available as PDF file on the ServerBooks CD supplied)
– The “Adaptec HostRAID User’s Guide” (PDF available on the ServerBooks
CD supplied)
– The “Service Supplement for PRIMERGY RX200 S3” (PDF available on the
ServerBooks CD supplied)
I You can order a supplementary ServerBooks CD by sending an e-mail to
the following address, quoting your server data:
Reklamat-PC-LOG@fujitsu-siemens.com
Further sources of information:
– Technical Manual on the relevant rack
– Manual on the monitor
– Manual on ServerView Server Management
– Manual on RemoteView remote server management
– Documentation on boards and drives
– Documentation on your operating system
– Information files on your operating system
(see also “Related publications” on page 49)

Fujitsu PRIMERGY RX200 S3 Specifications

General

Number of Processors	2
Storage	Up to 6 x 3.5" SAS/SATA HDD
RAID Support	RAID 0, 1
Network	Dual Gigabit Ethernet
Form Factor	1U Rack
Power Supply	Hot-plug redundant power supply