EasyManuals Logo

Fujitsu PRIMERGY RX200 S3 Options Guide

Fujitsu PRIMERGY RX200 S3
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
RX200 S3 Options Guide 25
6 Processors
V CAUTION!
Please observe the safety information in the chapter “Safety Instructions”
on page 11ff.
V CAUTION!
Processors are components which are extremely sensitive to electro-
static discharge and must be handled with caution.
When you take a processor out of its protective wrapper or out of a
socket, place it on an insulated, antistatic surface with the smooth side
down.
Never slide a processor over a surface.
6.1 Installing a second processor
The system board can be upgraded with a second processor.
V CAUTION!
You may only use processors of the same type. The second processor
must have the same clock frequency as the first. For dual-processor
mode use a suitable multiprocessor operating system.
Ê Open the server as described in the chapter “Preparation” on page 17f.
Removing the air duct
Ê Lift the air duct up and off.

Other manuals for Fujitsu PRIMERGY RX200 S3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY RX200 S3 and is the answer not in the manual?

Fujitsu PRIMERGY RX200 S3 Specifications

General IconGeneral
Number of Processors2
StorageUp to 6 x 3.5" SAS/SATA HDD
RAID SupportRAID 0, 1
NetworkDual Gigabit Ethernet
Form Factor1U Rack
Power SupplyHot-plug redundant power supply

Related product manuals