RX200 S6 Operating Manual 27
2 Installation steps, overview
This chapter contains an overview of the steps necessary to install your server.
Links take you to sections where you can find more detailed information about
the respective steps:
Ê First of all, it is essential that you familiarize yourself with the safety
information in chapter "Important information" on page 29.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section "Unpacking the server" on page 44).
Ê The server includes loose parts. Keep these parts in a safe place. They are
designed to be used for installing optional components at a later time.
Ê Transport the server to the place where you want to set it up.
Ê Make sure that you have all necessary manuals (see "Documentation
overview" on page 12); print out the PDF files if required.
Ê Fit the server in the rack (see section "Installing/removing the server in/from
the rack" on page 45).
Ê Wire the server. Follow the instructions in sections "Connecting devices to
the server" on page 56 and "Notes on connecting/disconnecting cables" on
page 60.
Ê Connect the server to the mains (see section "Connecting the server to the
mains" on page 58).
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section "Controls and indicators" on page 61).
To Next Page
Loading...
