RX200 S6 Operating Manual 43
4 Hardware installation
V CAUTION!
● Follow the safety instructions in the chapter "Important information"
on page 29.
● Do not expose the server to extreme environmental conditions (see
"Ambient conditions" on page 25). Protect the server from dust,
humidity and heat.
● Make sure that the server is acclimatized for the time indicated in this
table before putting it into operation.
In the table "Acclimatization time", the temperature difference refers
to the difference between the operating environment temperature and
the temperature to which the server was exposed previously (outside,
transport or storage temperature).
Temperature difference (°C) Minimum acclimatization time
(hours)
53
10 5
15 7
20 8
25 9
30 10
Table 1: Acclimatization time
To Next Page
Loading...
