RX2520 M5 Operating Manual 31
HDD/SSD prefailure detection
Depending on your hardware configuration HDD/SSD prefailure detection will
be supported.
The requirements are:
– iRMC S5 Firmware 1.2 or later
– supported OOB RAID system
3.3.2.3 Indicator on the ODD
I ODDs may have an indicator or not.
Figure 12: Example: Indicator on the ODD
Pos. Indicator Status Description
1
Activity
indicator
off The ODD is inactive.
green on The storage medium is being accessed.
To Next Page
Loading...
