EasyManuals Logo

Fujitsu PRIMERGY RX2520 M5 User Manual

Fujitsu PRIMERGY RX2520 M5
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
RX2520 M5 Operating Manual 61
Starting up
Information for ensuring electromagnetic compatibility
All data and signal cables must have sufficient shielding. The use of cable type
S/FTP Cat5 or higher is recommended.
Use of unshielded or badly shielded cables may lead to increased emission of
interference and/or reduced fault-tolerance of the device.
5.4.2 Connecting devices to the server
The connectors for external devices are on the front and rear of the server, see
section "Connectors on the server" on page 24.
I For a remote installation using the ServerView Installation Manger a LAN
connection is necessary.
I Some of the devices that can be connected may require special
software, e.g. drivers (see the documentation for the connected device).
Connecting the keyboard, mouse and monitor
Ê Connect the keyboard and mouse to the USB connectors of the server.
Ê Connect the monitor to one of the two video connectors at the front or rear.
I The front video connector is designed for maintenance issues. If you
connect a monitor to the video connector at the front, the video
connector at the rear is deactivated. A monitor connected to the front
must have at least the same resolution as the monitor connected to
the rear. A console bypass is not possible via the video connector at
the front.
I If a separate graphics card is installed in a slot, the graphic controller
on the system board is automatically deactivated. The corresponding
video connector can not be used. Connect the video cable of the
monitor to the video connector of the graphics card.
Ê Connect the power cord of the monitor to a power outlet of the rack socket
strip.
I The rated current for the monitor is indicated on the technical data label
on the monitor or in the operating manual for the monitor.

Table of Contents

Other manuals for Fujitsu PRIMERGY RX2520 M5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY RX2520 M5 and is the answer not in the manual?

Fujitsu PRIMERGY RX2520 M5 Specifications

General IconGeneral
Tcase72 °C
Scalability4S
Processor cache16.5 MB
Processor cores4
Processor model5222
System bus rate- GT/s
Processor socketLGA 3647 (Socket P)
Processor threads8
Processor codenameCascade Lake
Execute Disable BitYes
Motherboard chipsetIntel® C624
Processor frequency3.8 GHz
Processor cache typeL3
Processor lithography14 nm
Processor manufacturerIntel
Processor package size76.0 x 56.5 mm
Processor boost frequency3.9 GHz
Processor operating modes64-bit
Embedded options availableNo
Supported instruction setsAVX-512
Thermal Design Power (TDP)105 W
Number of processors installed1
Maximum number of SMP processors2
Maximum number of PCI Express lanes48
Memory types supported by processorDDR4-SDRAM
Memory clock speeds supported by processor2933 MHz
Maximum internal memory supported by processor1024 GB
HDD size- \
RAID levels0, 1
HDD interface-
Supported HDD sizes2.5 \
Total storage capacity0 GB
Maximum storage capacity- TB
Number of HDDs installed0
Chassis typeRack (2U)
Trusted Platform Module (TPM) version2.0
Compatible operating systemsMicrosoft Hyper-V Server 2016 Microsoft Windows Server 2016 Datacenter Microsoft Windows Server 2016 Standard Microsoft Windows Server 2016 Essentials Microsoft Windows Storage Server 2016 Standard Microsoft Hyper-V Server 2012 R2 Microsoft Windows Server 2012 R2 Datacenter Microsoft Windows Server 2012 R2 Standard Microsoft Windows Server 2012 R2 Essentials Microsoft Windows Storage Server 2012 R2 Standard VMware vSphere 6.5 VMware vSphere 6.0 SUSE Linux Enterprise Server 12 Red Hat Enterprise Linux 7 Red Hat Enterprise Linux 6 Univention Corporate Server 4
Memory slots12
Internal memory32 GB
Maximum internal memory768 GB
Cabling technology10/100/1000Base-T(X)
Ethernet interface typeGigabit Ethernet
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity6
Power supply800 W
Operating temperature (T-T)5 - 45 °C
Operating relative humidity (H-H)10 - 85 %
CertificationCB, RoHS, WEEE, GS, CE, CSAc/us, FCC Class A, ICES-003/NMB-003 Class A, VCCI:V3 Class A + JIS 61000-3-2, EAC, KC, CCC, RCM, BSMI
PCI Express slots version3.0
PCI Express x16 (Gen 3.x) slots3
On-board graphics card modelNot available
Processor ARK ID192445
Weight and Dimensions IconWeight and Dimensions
Depth770 mm
Width482.4 mm
Height86.6 mm
Weight25000 g

Related product manuals