56 Operating Manual RX2520 M5
To accommodate the ventilation concept and ensure proper ventilation, any
unused areas in the rack must be sealed using dummy covers.
The power is supplied via the multiple socket outlets fitted in the rack (not valid
for Japan).
The main features of Fujitsu rack systems are as follows:
– rail systems that can be mounted without tools
– support systems having a linear alignment feature to ensure that they can
be adjusted to different rack depths
Asymmetrical PRIMECENTER rack and DataCenter rack provide an enhanced
cable management in the lateral rack area.
3rd party racks
I Installation in most current rack systems from other manufacturers
(3rd party racks) is also supported. For details please contact your sales
representative.
– Wire the server. Read the information in section "Connecting devices to the
server" on page 61 and section "Notes on connecting/disconnecting cables"
on page 60.
– Connect the system to the mains, see section "Connecting the power cord"
on page 62.
To Next Page
Loading...
