RX300 S5 Service Supplement 49
Replacement routines Replacing the system board
V CAUTION!
After installing the new system board, it is necessary to update system
specific data (e. g. BIOS, iRMC S2 firmware) to ensure proper operation
(BIOS flash floppy disk , BIOS flash memory stick or iRMC flash memory
stick, refer to the BIOS Manual for a detailed description).
I If the customer owns a licence key for Advanced Video Redirection and
Remote Storage (iRMC2 Advanced Pack), the license key has to be
loaded onto the iRMC S2 via the iRMC S2 web interface after replacing
the system board. In addition, the iRMC S2 requires configuration.
Please refer to the „PRIMERGY ServerView Suite iRMC S2 - integrated
Remote Management Controller“ manual for a detailed description.
To Next Page
Loading...
