ServerView BX900 Management Blade 17
Agent SNMP Configuration of the SNMP settings, including SNMP
enabling/disabling, selecting an SMNP community string and a desti-
nation from the SNMP trap table.
Agent Telnet Configuration of the Telnet server settings, including Telnet port
assignment and Telnet enabling/disabling.
Agent DNS Configuration of the DNS server address and enabling/disabling DNS
support.
Agent SMTP Configuration of the SMTP settings for mail sending, including SMTP
enabling/ disabling, SMTP sender, SMTP relay server and mail user
account.
Agent SSH Configuration of the SSH settings.
Agent NTP Configuration of the NTP (network time protocol) service. You can
enable or disable the NTP service, set the NTP server’s IP address
and choose the Sync Mode:
– Sync Afterwards
Only if the management blade time is behind of NTP server time,
the management blade syncs the time from NTP server.
– Sync Always
The management blade always syncs the time from NTP server,
no matter whether the NTP server time is behind or ahead of
management blade.
Agent NIC Duplex Mode Setting of the management blade’s NIC duplex mode (full duplex or
half duplex). Execution Mode displays the current duplex mode, Setting
Mode allows you to specify which duplex mode should be active after
the next reset.
Option Description
To Next Page
Loading...
