16 ServerView BX900 Management Blade
16.I2C Bus Management (see 3.3.16 on page 35); no longer available in the sub-menu for server management
(as of MMB BX900 firmware version
5.32)
17./16. Management Blade Configuration Backup/Restore (see 3.3.17 on page 35)
18./17. Management Blade Base Configuration Backup/Restore (see 3.3.18 on page 36)
3.3.1 Management Agent Information
This item provides several options to configure and display parameters of the management agent, such as the
network IP address, Telnet and SMTP parameters, or date and time.
There are options that are used to set a single parameter, while others are used to set more than one. For the
former group of parameters their current values are displayed, too.
Altogether, the menu for these options looks like this:
Figure 4: Agent Information menu
These options are used to perform the following activities:
Option Description
Set Service Lan Configuration Configuration of the service LAN interface of the MMB.
Set Management Lan Configuration Configuration of the management LAN interface of the MMB.
Set Time Zone Configuration of the time zone for the management blade, which is
selected from a time zone table.
Set Management Agent Date Time Configuration of date and time for the management blade.
Set Management Agent Timeout Configuration of the time-out value for login to the console menu.
Agent System Info Settings used in SNMP for the management blade:
– system name
– system location
– system contact
Management Agent Administrative URL Display of the home page URL for the management blade.
Agent HTTP Configuration of the HTTP settings, including port number
assignment, HTTP protocol enabling/disabling and HTTP SSL
security control.
To Next Page
Loading...
