ServerView BX900 Management Blade 39
3.9 System Information Dump
This option is used to display the event logs of management blades or server blades and to display consecutive
lists of configuration/status information. The menu for this option looks like this:
Figure 26: System Information Dump menu
The following parameters are displayed:
Parameter Description
System Configuration/Status Displays a consecutive list of system information, e.g. status, IP address,
MAC address and firmware version of the connection blades.
SEL for Management Blade Displays the management blade event log.
Server Blade Configuration/Status Displays a consecutive list of information about the server blades, e.g.
status, BIOS version, iRMC firmware version, OS type and OS version.
SEL for Server Blade Displays the server blade event log.
Dump System Information Provides information about temperatures, voltages, fan speeds, all modules’
FRU data and event logs.
Dump Post Mortem Use in case of problem, to get all necessary information on customer site to
analyze the problem in the development.
Dump System Information/POST
Mortem Backup Configuration
Permits the System Information Dump and POST Mortem Dump to be
backed up on a USB medium.
To Next Page
Loading...
