ServerView BX900 Management Blade 37
Figure 24: Console Redirection menu
There is a sub-option of console redirection for server blades and one for connection blades. Furthermore, a return
hotkey can be configured:
3.6 TFTP Update
The TFTP Update option is used to perform an update of the management blade firmware.
I For further information on updating BX components please refer to the Operating Manual of your BX system.
The menu for this option looks like this:
Figure 25: TFTP Update menu
Sub-option Description
Console Redirect Connection Blade This option is used to configure a connection blade for console
redirection.
Set Return Hotkey, Ctrl+(a character) This option is used to configure a return hotkey.
To do this, a character from A-Z is chosen, excluding M. The hotkey to
exit console redirection and return to the previous mode is then Ctrl + the
character that has been set here, e.g. Ctrl + R.
The default character used for the return hotkey is Q.
Set Console Redirection Timeout An active connection is automatically disconnected after n seconds.
To Next Page
Loading...
