Fujitsu PRIMERGY ServerView BX900 - Power Consumption

Telnet Interface Management Agent
ServerView BX900 Management Blade 33
3.3.13 Power Consumption
This option is used to control the power consumption.
The menu for this option looks like this:
Figure 18: Power Consumption menu
The following parameters are displayed:
Parameter Description
Power Budget Control Threshold Displays the max. DC power of the active power supply.
Base Consumption Power consumption of the base system. Includes one
management blade and 6 fan modules.
Total Consumption Current power consumption of the whole blade server system
(including server blades).
Remaining Difference between Power Budget Control Threshold and current
Total Consumption.
System Power Unit Status Table Displays the max. DC power and the voltage range of the power
supply units.
System Power Unit Current Status Table Displays the current status of each active PSU (power
consumption and voltage).
Server Blade Power Consumption Table Displays the max. DC power consumption of each server blade.
Server Blade Current Power Consumption
Tab le
Displays the current status of each active server blade (power
consumption).
Storage Blade Power Consumption Table Displays the max. DC power consumption of each storage blade.
Storage Blade Current Power Consumption
Tab le
Displays the current status of each active storage blade (power
consumption).
Connection Blade Power Consumption Table Displays the max. DC power consumption of each connection
blade.
Connection Blade Current Power
Consumption Table
Displays the current status of each active connection blade (power
consumption).
Set Power Budget Control (no longer
available as of firmware version 5.32)
Settings for power control (redundancy, dynamic, limit values, etc.)
– observe submenus.