ServerView BX900 Management Blade 55
5.2.1 History Tab
The power consumption values for the system unit are displayed on the History tab. Options for diagram display
can be selected in the uppermost two boxes. The tab contains four boxes.
Figure 44: Power Management – History, display options and consumption of the system unit
Power History Options
The power consumption history can be enabled or disabled. When the history is enabled, flowcharts are displayed
in addition to the bar charts.
One of seven units can be selected as the period for the flowcharts (Minimum: 1 Hour; Maximum: 1 Year). The
period defines the period of time which is displayed in the flowcharts further below in the frame.
Power Unit Options [...]
Here you can choose between Watt and BTU/h as the unit for the power consumption values which is to be used
in the diagrams.
Input Power Details [...]
A bar chart and, if enabled, a flowchart are displayed for the system unit. The various characteristic values are
displayed in different colors, a key above the bar chart specifying their meaning. The following characteristic values
are displayed:
– Actual power consumption
– Minimum power consumption
– Average power consumption
To Next Page
Loading...
