30 ServerView BX900 Management Blade
3.3.9.3 Server Blade Power On/Off Event Log Enable
This option is used to specify, whether power on/off events for the server blades should be listed in the event log.
3.3.9.4 Management Blade Wrap Around Event Log Enable
This option is used to specify whether the wrap-around functionality for the event log should be used or not.
3.3.9.5 Backup All Event Log to USB Device
This option is used to save the MMB’s event log to a USB medium.
3.3.9.6 Management Blade Wrap Around Event Log Enable
Specifies whether the wrap-around functionality of the event log should be used or not.
Enabled (= 1): When the event log repository is full, new event log entries replace the old ones beginning with the
first event log entry.
Disabled (= 0): When the event log repository is full, no event log entries are written any longer.
3.3.9.7 Backup All Event Log to USB Device
BX400 only. Copies the log message to USB device. 0 = disabled.
3.3.10 Set System Default
The Set System Default option is used to restore the default values.
The menu for this option looks like this:
Parameter Description
enable When the event log repository is full, new event log entries replace the old ones
beginning with the first event log entry.
disable When the event log repository is full, no event log entries are written any longer.
Parameter Description
USB device selection Selects the USB medium (all the devices connected to the MMB are displayed
here).
Filename (empty default name) Name of the file which will be written to USB – if nothing is entered, a default
name is used.
Enable Starts the backup to the USB medium.
To Next Page
Loading...
