Fujitsu PRIMERGY ServerView BX900 - Logging in on the Management Blade as an AD User

Global User Management Configuring an Active Directory Server
ServerView BX900 Management Blade 69
Alternatively MMB configuration can be performed using the SMASH-CLP interface.
Open the BX900 MMB SMASH-CLP interface and navigate to the target:
/OemFujitsuSiemens/AgentInfo/LdapAuthentication.
The settings are the same as in the WebUI and can be set using the command notation:
set [property]="[value]", e.g. set AgentLdapRootDomainName="testdomain1.local"
A Help command is available for every writeable property, e.g. help AgentLdapType.
Figure 56: MMB settings SMCLP
6.1.5 Logging in on the Management Blade as an AD User
When a user logs in on the management blade as an AD user, the domain is appended in the login mask. The
notation is [username]@[domain] (e.g. mmbadmin@testdomain1.local).
Figure 57: Active Directory: Login WebUser Interface
Whether the login was correct can be checked on the web interface.