Fujitsu PRIMERGY ServerView BX900 - Connection Blade Configuration Backup;Restore

Management Agent Telnet Interface
32 ServerView BX900 Management Blade
The following parameters are displayed:
3.3.12 Connection Blade Configuration Backup/Restore
This option is used to backup/restore the configuration values of the connection blade.
Figure 17: Connection Blade Configuration Backup/Restore
The following parameters are displayed:
Parameter Description
CMOS Control Specifies the backup/restore policy:
backup
The BIOS parameters of the selected server blade are backed up.
smart-restore
After the slot id, BIOS version and MAC address have been verified,
the backup file of the selected server blade is restored.
force-restore
The backup file is restored without verification.
CMOS Configure Restore Target Specifies the server blade whose BIOS parameters are to be restored.
Server CMOS ID With BIOS Version Displays the CMOS ID with BIOS version.
Server CMOS ID With Mac Address Displays the CMOS ID with MAC address
Backup Date Time Displays date and time of the backup file generation.
Parameter Description
Backup/restore Control Specifies whether a backup process or a restore process is to be
started.
USB Backup/restore Control Specifies whether a backup process or a restore process for a USB
medium is to be started.
View Backup Configuration Displays the configuration of the connection blade when a backup has
been saved successfully.
Current Backup Connection Blade Type Displays the type of connection blade (SB11/SB11a, etc.) when a
backup has been saved successfully.
Current Backup Connection Blade Mode Displays the mode of the connection blade (Switch Mode, IBP) when
a backup has been saved successfully.