ServerView BX900 Management Blade 79
Alternatively the MMB configuration can be performed using the SMASH-CLP interface.
Open the BX900 MMB SMASH-CLP interface and navigate to the target
/OemFujitsuSiemens/AgentInfo/LdapAuthentication.
The settings are the same as in the WebUI and can be set using the command notation:
set [property]="[value]", e.g. set AgentLdapRootDomainName="testdomain3.local"
A Help command is available for every writeable property, e.g. help AgentLdapType.
Figure 67: eDirectory MMB settings SMCLP
To Next Page
Loading...
