TX200 S5 Options Guide 35
6 Processors
V CAUTION!
Follow the safety instructions in the chapter “Safety instructions”.
V CAUTION!
Processors are modules which can react extremely sensitively to electro-
static discharges and which must therefore always be handled with care.
After a processor has been removed from its protective sleeve or from its
socket, place it with its smooth side down on a non-conducting, antistatic
surface. Never slide a processor over a surface.
6.1 Installing a second processor
The system board can be upgraded with a second processor. The upgrade kit
consists of a processor and a heat sink.
Figure 15: Configuration with two processors
To Next Page
Loading...
