68 Options Guide TX200 S5
Installing expansion cards Expansion cards and BBU
V CAUTION!
If a long expansion card was installed, the plastic part of system fan 2 (or
2&4), which belongs to the related slot, must be broken off before system
fan 2 (or 2&4) is installed.
Figure 53: Example: System fan 2 - Breaking off plastic part
Ê Reinstall system fan 2 (or 2&4) as described in the chapter “Completion”.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter “Completion”.
To Next Page
Loading...
