TX200 S5 Options Guide 99
Completion Rack model
Ê Lower the server from above onto the projecting telescopic rails (2). As you
do this, the locking bar engages (3).
Ê Push the locking mechanism of both telescopic rails up (4).
Ê Push the server as far as it will go into the rack (5).
Ê Fasten the server to the rack (6) using the two knurled screws (front panel).
Ê Connect all cables on the rear of the server.
Ê Connect all power plugs to the power outlets.
Ê Press the On/Off button to start up the server.
To Next Page
Loading...
