Fujitsu ScanPartner SP30F User Manual

Appendix
Chapter 7 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
100
How to Load
Documents
Scanner
Overview
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Troubleshooting
Vertical streaks appear on the scanned image.
Do the streaks always appear in the same location?
Yes
Clean the glass and rollers inside the ADF, or the document bed of the flatbed
(ScanPartner SP30F).
For details, refer to "Chapter 5 Daily Care" (page 70).
No
Does the vertical streak disappear when you set a lower
resolution?
Yes
Specify a lower resolution.
No
Is there any foreign matter (e.g. dust, paper dust) on the
document?
Yes
Remove any foreign matter off the document.
It may be carried onto the glass inside the ADF or the document bed of the flatbed
(ScanPartner SP30F), and cause vertical streaks on the scanned image.
No
If the problem persists, check the items in "7.4 Before You Contact the Scanner
Service Provider" (page 112) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.

Fujitsu ScanPartner SP30F Specifications

General

Brand	Fujitsu
Model	ScanPartner SP30F
Category	Scanner
Language	English