Fujitsu ScanPartner SP30F User Manual

Chapter 8 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
133
How to Load
Documents
Scanner
Overview
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Operational
Settings
Removing Shadows/Streaks that Appear around
the Scanned Image
[Page Edge Filler (ADF)]/[Page Edge Filler (FB)]
(ScanPartner SP30F)
Depending on the condition of the documents that you scan,
the shadow of the document may appear as black streaks.
In that case, you can improve the image quality around the
edges of the document by using the "Page Edge Filler"
function to fill in the edges.
1 Start up the Software Operation Panel.
For details, refer to "8.1 Starting Up the Software Operation Panel"
(page 116).
2 From the listing on the left, select [Device Setting 2]
J[Page Edge Filler (ADF)] or [Page Edge Filler (FB)]
(ScanPartner SP30F).
Vertical
magnification
Adjustment
Description
Unit Select [Flatbed]
(ScanPartner SP30F) or [ADF] as the target for
vertical magnification adjustment.
Vertical
magnification
Adjustment
(Sub: length)
Adjusts the vertical (length) magnification.
The value can range from -3.1 to +3.1% (in
increments of 0.1).

Fujitsu ScanPartner SP30F Specifications

General

Brand	Fujitsu
Model	ScanPartner SP30F
Category	Scanner
Language	English