Fujitsu ScanPartner SP30F User Manual

Appendix
Chapter 7 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
104
How to Load
Documents
Scanner
Overview
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Troubleshooting
Situation in which the document is not fed into
the ADF occurs frequently.
*1: "Consumables" refers to the brake roller and the pick roller.
Do the documents meet the requirements described in
"Precautions" in "Conditions" (page 42)?
No
Use documents that meet the requirements.
For details, refer to "2.3 Documents for Scanning" (page 42).
Yes
Did you fan the documents before loading them in the ADF
paper chute (feeder)?
No
Fan the documents before loading, or reduce the amount of documents.
Yes
Are the consumables
(*1) installed correctly?
No
Install the consumables (*1) correctly.
For details, refer to "Chapter 6 Replacing the Consumables" (page 80).
Yes
Are the consumables
(*1) clean?
No
Clean the consumables (*1).
For details, refer to "Chapter 5 Daily Care" (page 70).
Yes
Are the consumables
(*1) worn out?
Yes
Check the consumable counters and replace them if necessary.
For details, refer to "Chapter 6 Replacing the Consumables" (page 80).
No
If the problem persists, check the items in "7.4 Before You Contact the Scanner
Service Provider" (page 112) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.

Fujitsu ScanPartner SP30F Specifications

General

Brand	Fujitsu
Model	ScanPartner SP30F
Category	Scanner
Language	English