Appendix
Chapter 7 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
103
How to Load
Documents
Scanner
Overview
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Troubleshooting
*1: "Consumables" refers to the brake roller and the pick roller.
*2: Note that when high altitude mode is enabled and the scanner is used at altitudes lower than 2,000 m, multifeed may not be detected.
Yes (continued)
Are the consumables (*1) worn out?
Ye s
Check the consumable counters. Replace consumables as necessary.
For details, refer to "Chapter 6 Replacing the Consumables" (page 80).
No
Are you using the scanner at an altitude of 2,000 m or higher?
Ye s
Enable high altitude mode in the Software Operation Panel.
For details, refer to "Scanning at High Altitude [High Altitude Mode]" (page 137).
No
If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 112) first,
then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
To Next Page
Loading...
Need help?
General