Fujitsu ScanSnap fi-5110EOX - Operation Button; Rear Side

4
■ Operation Button
■ Rear Side
SCAN
POWER
DUPLEX
COLOR
[SCAN] button
Press this button to start the scanning.
[POWER] button
Turns on/off the power supply.
Power lamp
Indicates the scanner status.
Green; Lighting :Ready
Green; Blinking :Scanning
Orange; Lighting :Error
Light off :Power off
Seal (informing you that the installation of the
software has to be performed first)
After installing the software, remove this seal.
USB connector
AC adapter connector