68
■ Merging scanned images into one PDF file
When you are scanning documents and saving them in PDF format, the following window
appears if the scanning is interrupted by a paper jam or another error.
In that case you can resume or abort the scanning by the following procedure.
To resume scanning:
1. Check the last page scanned on the "Message" window.
2. Load the unscanned pages back onto ADF.
3. Click [Resume scanning] button to restart the scanning.
To quit scanning:
1. Click the [Quit] button.
⇒ The following window appears.
2. Click [Yes] to delete the data that were scanned up to the interruption. Otherwise,
click [No] to save the data that were scanned up to the interruption. (*Click [Cancel]
not to quit but to return to the previous window.
To Next Page
Loading...
