Profile
This section explains profiles.
Once the frequently used scan settings are saved as profiles, you can select a profile to easily
change scan settings depending on your scanning purpose.
You can manage up to 20 profiles.
To select a profile, click the ScanSnap Manager icon
to show the Profile menu.
l How to use profiles to perform scanning
"Using Profiles to Perform Scanning" (page 39)
l How to configure scan settings for profiles depending on your intended use of the scanned
images
"How to Configure Scan Settings" (page 83)
HINT
l To use a profile, you need to clear the [Use Quick Menu] checkbox in the ScanSnap setup window.
l You can also display the Profile menu by selecting [Profile] from the ScanSnap Manager menu.
l You can also select a profile from [Profile] in the ScanSnap setup window.
Profile
38
To Next Page
Loading...
