Fujitsu SCANSNAP iX1300

Scanning Only One Side of a Document (iX1500,
iX500, or S1300i)
To scan only one side of a document, in the [Scanning] tab of the ScanSnap setup window, select
[Simplex Scan] in the [Scanning side] drop-down list.
HINT
Click the ScanSnap Manager icon in the Dock while holding down the [control] key on the
keyboard, and when you select [Simplex Scan] from the ScanSnap Manager menu, scanning is
performed in simplex mode even if [Duplex Scan] is specified for [Scanning side] in the [Scanning] tab.
Scanning Only One Side of a Document (iX1500, iX500, or S1300i)
53