Fujitsu SCANSNAP iX1300 User Manual

Changing the Display Order of Profiles
This section explains how to change the display order of profiles.
However, you cannot change the [Standard] display order.
1. Click the ScanSnap Manager icon in the Dock while holding down the
[control] key on the keyboard, and select [Profile Management] from the
ScanSnap Manager menu.
a The [ScanSnap Manager - Profile Management] window appears.
HINT
l If you cannot select [Profile Management] in the ScanSnap Manager menu, clear the [Use
Quick Menu] checkbox in the ScanSnap setup window.
l You can also display the [ScanSnap Manager - Profile Management] window by selecting
[Profile Management] from [Profile] in the ScanSnap setup window.
2. Drag a profile to the desired position in the list.
3. Click the [ ] button in the upper left of the window to close the [ScanSnap
Manager - Profile Management] window.
Profile Management
49

Fujitsu SCANSNAP iX1300 Specifications

General

Brand	Fujitsu
Model	SCANSNAP iX1300
Category	Scanner
Language	English