Adding Profiles
This section explains how to add a profile.
Up to 20 profiles can be saved including the [Standard] profile.
1. Click the ScanSnap Manager icon in the Dock while holding down the
[control] key on the keyboard, and select [Settings] from the ScanSnap
Manager menu.
a The ScanSnap setup window appears.
2. Clear the [Use Quick Menu] checkbox.
3. Configure the scan settings in each tab.
For details about each tab, refer to the ScanSnap Manager Help.
4. Select [Add Profile] from the [Profile].
Profile Management
42
To Next Page
Loading...
Need help?
General