ATTENTION
l Do not perform the following operations during scanning. Doing so will stop scanning.
- Connect or disconnect the ScanSnap and other USB devices.
- Switch users.
- Allow the computer to enter sleep mode.
l Do not cover the white sheet with an object or hand during scanning. The color reproducibility
of the scanned image will be affected.
l Do not shake the table or desk when the ScanSnap is being used or move the documents
while they are being scanned. Doing so may distort the scanned image or blur the color.
HINT
l You can also start scanning a book by right-clicking the ScanSnap Manager icon in the
notification area and then selecting [Scan] from the "Right-Click Menu" (page 41).
l When page turning detection is used, turning a book's page automatically starts scanning.
For details, refer to "Scanning Documents Using Page Turning Detection" (page 68).
l When timed mode is used, after the specified time the ScanSnap automatically starts
scanning. For details, refer to "Scanning Documents Using Timed Mode" (page 72).
a The power LED on the ScanSnap flashes in blue while the book is being scanned.
The [ScanSnap Manager - Image scanning and file saving] window appears.
Scanning a Book
27
To Next Page
Loading...
