Fujitsu ScanSnap SV600

Right-Click Menu
This menu appears when you right-click the ScanSnap Manager icon .
Item Function
Scan Scans the document placed in the scan area of the ScanSnap. Follows the settings
configured in [Scan Button Settings].
Scan Button Settings Displays the "ScanSnap Setup Dialog Box" (page 43). You can configure the scan
settings in this window.
Profile Management The [ScanSnap Manager - Profile Management] dialog box appears.
You cannot select [Profile Management] when the [Use Quick Menu] check box is
selected in the ScanSnap setup dialog box.
For details, refer to the Advanced Operation Guide.
ScanSnap Folder Settings Displays the ScanSnap setup dialog box. You can configure the scan settings for
using ScanSnap Folder in this dialog box.
For details, refer to the Advanced Operation Guide.
Show scanning results After scanning is completed, a message appears to inform you whether the image is
rotated.
Preferences Displays the [ScanSnap Manager - Preferences] dialog box.
Right-Click Menu
41