Fujitsu ScanSnap SV600

Scanning Documents Using Timed Mode
This section explains how to automatically start scanning by setting the time period for the document
scanning to start.
1. Right-click the ScanSnap Manager icon
in the notification area, and select
[Scan Button Settings] from the "Right-Click Menu" (page 41).
a The "ScanSnap Setup Dialog Box" (page 43) appears.
2. In the ScanSnap setup dialog box, select the [Scanning] tab, and click the
[Option] button.
a The [Scanning mode option] dialog box appears.
3. Set the time period before the ScanSnap starts scanning a document.
l To set the time period before the ScanSnap starts scanning a document after the [Scan]
button is pressed:
Select the [Specify the waiting time to start scanning after pressing the [Scan] button.]
check box, and then specify [Waiting time].
Scanning Documents Using Timed Mode
72