Reproducing a Book in Rack2-Filer Smart
This section explains how to digitize a book, and reproduce and manage the digitized book in
Rack2-Filer Smart.
You can scan the front cover, pages, back cover, and spine of a book, and import the scanned
images to Rack2-Filer Smart.
You can use Easy Book Creation to reproduce a book. The following functions are available:
l The size of the scanned book can be reproduced.
l The front cover and spine of the book can be set.
l After scanning the facing pages as a single image, it can be viewed as a double-page spread.
l Based on the page size, the size of the page in the binder is automatically changed.
XXXXXXXXXXXX
Rack2-Bookshelf Window
Viewer Window
The front cover and spine
of the book can be set
The size of the scanned book
can be reproduced
The facing pages can be viewed
as a double-page spread
The size of the page is
automatically changed
1. Scan a book with the ScanSnap.
Scan the book in the following order:
1. Front cover
2. Pages
3. Back cover
Reproducing a Book in Rack2-Filer Smart
62
To Next Page
Loading...
